Stone & Marble Protection Film Cost in Australia (2026)

One of the first questions people ask about protecting a marble or stone benchtop is what it costs. Here is the straight answer, what it includes, and the honest comparison with the maintenance schedule you are already on.

What does marble and stone protection film cost in Australia?

• All DURAFLEX films are priced from $450+GST per lineal metre, installed.
• The roll is 1500mm wide, so one lineal metre protects up to 1.5 square metres of stone in a single seamless piece. Standard benchtop and island depths are covered without joins.
• A 6 lineal metre minimum applies. Projects under 6 lineal metres attract a $250+GST callout.
• A 50% deposit secures your installation date.

What that price includes

The benchmark is not a number pulled from the air. From $450+GST per lineal metre installed, every DURAFLEX project includes:

• Certified DURAFLEX film, independently fire-tested by CSIRO to AS/NZS 1530.3 with perfect indices.
• Heat-activated self-healing proven in independent SGS testing (ULTRA Satin-X).
• An accredited, automotive-trained installer from the largest trained installer network in the Australian category.
• Heat-sealed edges, bonded to the stone rather than laid on top of it.
• A warranty of up to 10 years, backed by the manufacturer.
• Aftercare and service from the company that makes the film, which is made from food-safe materials.

Why prices below the benchmark usually mean something is missing

Certified film, trained people, edge finishing, warranty backing and aftercare all have real costs. When a price lands well under the benchmark, the difference has to come from somewhere. Before you book, it is worth asking which of these has been left out:

• Film with no independent test reports behind it: no fire testing, no lab-verified self-healing.
• Edges laid on rather than heat-sealed, so they can lift, catch and let moisture creep underneath.
• Installers without automotive-grade film training.
• Per-square-metre rates that exclude edge finishing, cutouts and callouts, so the final invoice grows.
• A warranty that is short, limited or not backed by the manufacturer.
• No aftercare, so there is no one to answer for the film in year three.

A lower price is not necessarily dishonest. It is usually a different product: less testing, less training, less finishing, less backing. Compare what is included, not just the number.

Some Australian suppliers advertise stone protection film at per-square-metre rates of around $330 per square metre; published rates change, so always confirm current terms with the supplier directly. For comparison, the DURAFLEX 1500mm roll means $450+GST per lineal metre works out to as little as around $300+GST per square metre at full width utilisation, with the certification, heat-sealed edges, warranty and aftercare included.

Film once, or maintenance forever

The honest comparison is not film versus nothing. It is film versus the maintenance schedule you are already on.

• Sealing: sealer manufacturers recommend reapplication every 6 to 12 months, and sealer slows staining but cannot stop etching. Over 10 years that is 10 to 20 sealing visits, with acid marks still appearing between coats.
• Etch repair: every splash of lemon, wine or vinegar that wins means another round of professional polishing, and each repolish removes a little more of the surface. It is a cycle, not a fix.
• DURAFLEX: one installation from $450+GST per lineal metre, a warranty of up to 10 years, and a surface that takes the daily hits instead of your marble. Stop playing the marble police.

Marble is beautiful and fragile. Protecting it once, properly, is the cheapest thing you will ever do for it.

Wondering about hot pans on the film? See how DURAFLEX handles heat on marble benchtops.

How to get your exact figure

Because every kitchen layout is different, the only exact number is one based on your benchtops. Send your surface and rough measurements through the estimate tool on this page and the DURAFLEX team will reply with an itemised estimate, usually the same day. For what the film is and how it works, see marble protection film, and for the sealing side see marble sealing.

Marble sealing by city: Melbourne, Sydney, Brisbane, Adelaide and Hobart.

Frequently asked questions

How much does marble protection film cost in Australia?

Genuine certified film starts from $450+GST per lineal metre installed, the benchmark set by DURAFLEX. The roll is 1500mm wide, so one lineal metre protects up to 1.5 square metres in a single seamless piece. A 6 lineal metre minimum applies, with a $250+GST callout for smaller projects.

How much does stone protection film cost per square metre?

DURAFLEX prices stone protection film by the lineal metre, not the square metre: $450+GST per lineal metre, installed. The roll is 1500mm wide, so one lineal metre covers up to 1.5 square metres, which works out to as little as around $300+GST per square metre at full width utilisation; benchtop depth affects how much of the roll width each cut uses. Lineal-metre pricing means you can measure your benchtop lengths and know your figure instantly, no site visit, while per-square-metre rates move with cutting complexity, width and layout.

What does the $450 per lineal metre include?

Certified CSIRO fire-tested film, SGS-verified heat-activated self-healing (ULTRA Satin-X), an accredited automotive-trained installer, heat-sealed edges, a manufacturer-backed warranty of up to 10 years and ongoing aftercare.

Why are some stone film prices cheaper?

Certified film, trained installers, heat-sealed edges, warranty backing and aftercare all have real costs, so a price well below the benchmark usually means one of them is missing. Compare what is included, not just the number.

Is film cheaper than resealing over time?

Over a decade, usually yes. Sealing needs reapplying every 6 to 12 months and still cannot stop etching, while DURAFLEX is one installation with a warranty of up to 10 years. Add the etch repairs sealing never prevented and the one-time film is the economical choice.