Melbourne loves marble. It runs through kitchens from Toorak and Brighton to South Yarra, Kew and the bayside, and with it runs Marble Anxiety, the quiet worry that one glass of wine or squeeze of lemon leaves a permanent mark. DURAFLEX exists to end that worry.
Fast · 20 seconds · no obligation
Build your protection estimate ↓
Just 4 quick questions and the DURAFLEX team texts back an itemised, no-obligation estimate, usually same day.
What are we protecting?
Sealing vs protection film: what each one does
A sealer slows how fast liquids absorb into the stone and needs reapplying over time, but it offers no defence against acid etching. DURAFLEX is a physical barrier bonded to the surface: it stops both staining and etching, needs zero maintenance, and is backed by an up-to-10-year warranty. The two work together, the seal prepares the stone and the film protects it.
DURAFLEX is the invisible, self-healing polyurethane film that goes over your stone, so acids and everyday spills meet the film instead of the marble. Etching and staining cannot reach the surface underneath. It is installed across Melbourne by automotive-trained specialists, heat-sealed at every edge, and backed by an up-to-10-year warranty.
Why Melbourne chose marble, and why it needs DURAFLEX
Melbourne has more marble per kitchen than almost anywhere in the country. Designers specify Calacatta and Carrara islands, honed splashbacks and waterfall edges across the inner east, the bayside and the new builds reaching out to Glen Waverley and beyond. The catch is that polished marble etches the moment acid touches it, and no amount of sealing changes that.
DURAFLEX lets Melbourne keep the look it paid for and lose the fear. The film is optically clear and follows the polish of the stone, so a protected benchtop looks identical to an unprotected one, until something acidic spills and nothing happens. Stop playing the marble police in your own kitchen. Don't worry, it's DURAFLEX.
DURAFLEX in action
Real installation: the DURAFLEX Brighton East project.
Automotive-trained installers, not stone tradespeople
Film application is a precision job that rewards a steady hand and patience with edges. That background exists in automotive paint protection film installation, not stone restoration. Every DURAFLEX installer comes from the automotive film industry, and the technique transfers directly to stone: tension management, edge trimming and heat sealing.
Heat sealing and the up-to-10-year warranty
After the film is applied it is heat sealed to the surface. This activates the adhesive, closes the edges and removes the micro-lifting points that cause bubbling over time. The up-to-10-year warranty covers bubbling, lifting and yellowing, and every Melbourne job is completed to the same standard.
Serving Melbourne and surrounding suburbs
DURAFLEX services Melbourne and surrounding suburbs right across Victoria, from Toorak, Brighton, Hawthorn to Malvern and South Yarra. Installation is completed in a single visit with no curing period and no downtime, so the kitchen is back in normal use the same day, and every estimate is no-obligation.
Suburbs we protect across Melbourne
DURAFLEX installs marble and stone protection film throughout Melbourne. Find your suburb:
Stone protection in Melbourne
Searching for the best stone protection in Melbourne? DURAFLEX is the surface protection film Melbourne homeowners choose to keep marble and natural stone benchtops looking new. It is an optically clear, food-safe film that takes the etching, staining and scratching instead of the stone, fitted by automotive-trained installers across Melbourne and surrounding suburbs. A sealer alone slows spills but cannot stop etching, so the complete answer for stone protection in Melbourne is to seal the stone, then protect it with DURAFLEX film. From a Carrara island bench to an engineered stone kitchen, it is the marble benchtop protection Melbourne kitchens rely on. Request an instant estimate and the Melbourne team will take it from there.
Melbourne marble protection: common questions
Do you install marble protection film across Melbourne?
Yes. DURAFLEX has accredited installers covering metropolitan Melbourne, from the inner east and bayside to the outer suburbs. Every installer is trained in automotive paint protection film technique. Call 1300 656 656 or request an estimate online.
Will the film change how my marble looks?
No. DURAFLEX is optically clear and follows the polish of the stone, so the colour, veining and finish you chose stay exactly as they are. The difference only shows when something acidic is spilled and the marble underneath stays untouched.
How long does a Melbourne installation take?
Most Melbourne kitchens are completed in a single visit of a few hours. There is no curing period and no downtime, so the benchtop is back in normal use the same day the film goes on.
Does DURAFLEX stop etching as well as staining?
Yes. A sealer slows staining but does nothing for etching. DURAFLEX is a physical barrier, so the acids that would etch polished marble contact the film instead of the stone. Both etching and staining are prevented.
Which Melbourne suburbs do you cover?
DURAFLEX installs right across Melbourne, including Toorak, Brighton, South Yarra, Kew, Camberwell and Hawthorn. If your suburb is not listed below, call 1300 656 656 and we will arrange a local installer.
The pioneers
We didn't just invent stone protection film,
we pioneered an industry.
Invisibility is our Superpower!
With only 5% absorption, DURAFLEX keeps your stone aesthetically perfect while the physical barrier protects from etching and staining.
How it works
The cure for Marble Anxiety™ in 3 easy steps
Tell us your surface
Take the 20-second quiz and tell us the stone you've got.
Get an estimate
We text you back fast, usually same day. Have your measurements and a couple of photos ready.
We fit the film
Our accredited installers apply it on site. Most kitchens are done in a few hours.
Don't worry, it's DURAFLEX.
Why protect your stone
Cook without fear - take back your kitchen
Completely transparent.
Wine, coffee and oil wipe straight off.
Don't worry, it's DURAFLEX.
Light scratches simply disappear.
FAQ
Questions, answered
Will I be able to see or feel it?
No. It's optically clear and ultra-thin, so the stone looks exactly the same. Customers love the satin feel of our ULTRA Satin-X film (if that's what you're into).
Does it actually stop stains and etching?
DURAFLEX is completely non porous, meaning spills don't stand a chance. Wine, coffee, oil and citrus wipe away completely, protecting the stone from etching and staining.
How long does installation take?
Most kitchens are completed in a single day, approximately 2 hours per surface.
Off duty
Stop playing the marble police.
Build your no-obligation estimate in about 20 seconds, or call the team direct.
Build my estimate Call DURAFLEX 1300 656 656Don't worry, it's DURAFLEX.
DURAFLEX installs marble and natural stone protection film across Victoria. Explore the SPF Ultra film or all service locations.
What the DURAFLEX benchmark includes
From $450+GST per lineal metre installed, every DURAFLEX project in Melbourne includes:
- Certified DURAFLEX film from the company that created the surface protection film category in Australia.
- Independent fire testing by CSIRO to AS/NZS 1530.3, with perfect indices.
- Heat-activated self-healing proven in independent SGS testing (ULTRA Satin-X).
- An accredited, automotive-trained installer from the largest trained installer network in the category.
- Heat-sealed edges bonded to the stone, never laid on.
- A 1500mm seamless roll width, so standard benchtop depths are protected in a single piece with no joins.
- A warranty of up to 10 years, backed by the manufacturer.
- Aftercare from the people who make the film, which is made from food-safe materials.
Full pricing detail in the cost guide.
Don't worry, it's DURAFLEX.
Want to stay in the loop?
Sign up to the DURAFLEX mailing list.
© 2025 DURAFLEX. All rights reserved